The success or failure of a green roof depends on an effective specification that considers not only the structure itself but the location, orientation, shading and climate of the site. Only by working with waterproofing and green roof specialists, that can offer a proven roofing system along with the required level of horticultural expertise, can the specifier be confident of a viable long-term result.
While it may appear that planting can be decided at a later stage, in fact it is important that these decisions are considered at the design stage as the roof build-up impacts on the planting possibilities. For example, wildflower meadows are a popular choice for large expanses of roof surface, but they need plenty of moisture, which means designing the roof to accommodate the load and a greater depth of reservoir core and necessary growing medium required to keep the green roof healthy. Conversely, alpine planting needs much less water to thrive, which influences the load-bearing capabilities required from the roof.
Green roofs can also be incorporated into a project as part of a SuDS design. Water stored to irrigate the green roof reduces the potential impact of new and existing developments with respect to surface water drainage discharges. Again, considering the planting at an early stage means that the specifier is in a much more informed position to understand the level of water that will need to be stored or released from the roof.
The effectiveness of the waterproofing membrane used to create a watertight barrier between the roof substrate and the green roof system is the most critically important element of the specification. The membrane should be flexible enough to cope with any post-build ‘settlement’, tough and durable enough to cope with the load-bearing requirements of the planting medium and have a sufficiently long service life to make the green roof viable.
A common green roof design would typically consist of an inverted warm roof build-up, applying the waterproofing system to the roof substrate, followed by the insulation, and then the green roof elements. This can add an extra layer of protection for the waterproofing membrane as it is cushioned underneath the insulation.
However, the use of Kemperol V210 or Kemperol 2K-PUR with their additional strength and flexibility, means that the waterproofing can be applied either below the insulation or above as in the case of a conventional warm roof. This is because these systems are FLL certified as root resistant so there is no risk of root damage to the integrity of the waterproofing membrane, even as plants mature and their root size increases.
Consulting the membrane supplier for technical support can help determine the right specification in this regard.
Location, location, location
In terms of specification of the green roof planting itself, client preferences and aesthetics have a role to play, but a key consideration should always be the location and prevailing climatic conditions as these govern the amount of light, heat, shade and moisture the roof will receive. The influence of surrounding buildings, which can also affect shading levels and exposure to winds also need to be taken into account. These factors should be assessed in combination to determine the viability of different types of planting.
Of course, no matter how carefully considered the planting specification, without proper maintenance, post-installation, the green roof will not thrive. Establishing a maintenance plan and provision for the associated costs need to be factored in at the design stage for the aesthetics and benefits of the green roof to last long term.